Toyota HILUX 2008 Owner's Manual page 66

13H119a
4. Attach the child restraint attaching clip
to the child restraint anchor fitting.
Make sure the clip is securely attached
and tighten the upper anchorage strap.
See "—Child restraint anchorages" on
page 61 for instructions.
13H120a
CAUTION
Push and pull the child restraint sys-
tem in different directions to be sure
it is secure. Follow all the installation
instructions provided by its manufac-
turer.
13H049
5. To remove the baby (infant) seat, press
the buckle release button and allow the
belt to retract completely. The belt will
move freely again and be ready to
work for an adult or older child passen-
ger. Unhook the child restraint attach-
ing clip from the child restraint anchor
fitting.
55