SEVERIN FR 2446 Instructions For Use Manual page 12

Operating display
Display - Automatic programmes
Selector keys - Temperature higher /
lower
Light selection button
Automatic programme selection button
& saving automatic programme changes
(memory function)
On/Off & Start/Stop selection button
Rotation selection button
Time higher / lower selection buttons
Temperature shown in the display
Remaining time shown in the display
Heating up shown in the display
During the frying process, the symbol
lights up repeatedly to indicate that the
appliance is heating up.
Frying/hot air shown in the display
Insert selection
The following inserts are available for the various
applications:
Frying basket
∙ For the preparation of all types of fried food
Rotating basket
∙ Particularly suitable for french fries, vegetables, etc.
∙ Fill in the food to be cooked and close the flap.
∙ Place the loaded rotating basket on the handle.
∙ Place the rotary basket with the left side in the drive and
insert it with the right side in the bearing mount.
∙ After starting the appliance, the rotation of the
rotary basket must be started by pressing the
button to start it.
12
Rotary spit
∙ For preparing whole grilled chickens or rolled roasts.
∙ Chicken/roll roasts of max. 1 kg can be prepared.
∙ Push the skewer through the centre of the chicken/roll
roast and secure the meat with the clamps. The meat
must not touch the inside of the cooking chamber.
∙ Fix protruding parts of the food (e.g. wings of the
chicken) with roulade needles or similar.
∙ Place the loaded spit on the handle.
∙ Place the rotating spit with the left side in the drive and
insert it with the right side in the holder of the bearing.
∙ After starting the appliance, the rotation of the spit must
be started by pressing the
Grill rack
∙ For preparing pizza, rolls, baguettes
∙ Fit the grill grate and push it into the centre of the
appliance.
Gratings
∙ For drying fruit and vegetables
∙ Cut fruit and vegetables into slices of max. 5 mm
thickness.
∙ Load the grids and push them into the appliance.
Switch on the cooking chamber lighting
∙ During preparation, the interior lighting can be switched
on or off by pressing the
lighting on or off.
∙ After some time, the lighting switches off again.
∙ When the door is opened, the lighting switches on
automatically.
Preparing the unit
1. Always place the unit on a dry, level, non-slip and
heat-resistant surface impervious to contact with the
rubber feet.
2. Prepare the food to be air-fried.
3. Insert the plug into the socket. The display symbols
flash briefly and the
4. Place the drip tray on the bottom of the cooking
chamber.
5. Insert the selected accessories into the appliance.
If using the rotating basket, fill it with the food
beforehand and close the flap.
6. Switch on the low fat fryer by pressing the
for 2 seconds! To switch off, press it again for 2
seconds.
If the appliance is not being used, it will switch off
automatically after a short time.
button to start it.
button to switch the interior
button lights up.
button