Configuring Ypao - Yamaha MusicCast R-N2000ASL User Manual

SETTINGS > Setup menu (changing function settings)

Configuring YPAO

n
Reflecting YPAO measurements in speaker settings
Sets whether to reflect YPAO measurements in speaker settings.
"---" is displayed if YPAO has not been run yet, so this setting is not available.
Setup menu
"YPAO" > (each speaker) > "Setting"
Setting value
Off
On
NOTE
When YPAO is run, "YPAO" is automatically turned "On".
(
Even if it is turned "Off" (disabled), the settings are retained.
(
Related links
"Running YPAO" (p.42)
(
"Basic operation of the Setup menu" (p.94)
(
n
Automatically adjust bass/treble balance in tandem with volume
Sets whether to use the YPAO Volume function, which is linked to the volume and automatically adjusts the
bass/treble balance based on the YPAO measurements.
When this is "On", it allows you to enjoy a natural balance in sound quality, even at low volumes.
Setup menu
"YPAO" > (each speaker) > "YPAO Volume"
Setting value
Off
On
NOTE
When "YPAO" is "On", the YPAO Volume function can be set.
(
When YPAO is run, "YPAO Volume" is automatically turned "On".
(
When listening at a low volume, such as at night, we recommend setting "YPAO Volume" to "On".
(
Related links
"Running YPAO" (p.42)
(
"Basic operation of the Setup menu" (p.94)
(
Disables reflection of YPAO measurement results.
Enables reflection of YPAO measurement results.
Disables YPAO Volume.
Enables YPAO Volume.
102