Recording A Movie From Pictures Taken At A Set Interval (Interval Movie) - Pentax Optio W30 Operating Manual

Recording a Movie From Pictures Taken at a Set
Interval (Interval Movie)
In this mode, you can record multiple still pictures taken automatically at
a set interval from a set time, as a movie file. The default frame rate for
the recorded movie is 30 fps (frames per second).
You can set this to 1 minute, 5 minutes, 10 minutes, 30 minutes, or
Interval
1 hour.
Set the total time, from 10 minutes to 359 hours. The total time can
be set in increments of 1 minute, 5 minutes, 10 minutes, 30 minutes,
Total Time
or 1 hour.
Set the start delay, from 0 minutes to 24 hours. The start delay can
be set in increments of 1 minute for a delay time up to 59 minutes,
and increments of 1 hour for a delay time longer than one hour. If the
Start Delay
start delay is set to 0 min., the first picture is taken as soon as the
shutter release button is pressed.
1
Press the four-way controller (2) in
2
Use the four-way controller (45)
to select k (Interval Shoot) and
press the 4 button.
The current Interval Movie setting appears
for approximately five seconds. To take
pictures with the current setting, go to Step 8.
3
Press the 4 button while the
setting is displayed.
The Interval Movie setting screen appears. [Interval] is marked with a
frame.
10, 11
MENU
1, 2, 4, 5, 6, 7, 8
2, 3, 9
Rec.Mode
1/3
7 Recorded Pixels
M
Quality Level
AWB White Balance
AE Metering
ISO
Sensitivity
AUTO
Exit Exit Exit
MENU
mode.
C
Drive Mode Drive Mode Drive Mode
Interval Shoot Interval Shoot Interval Shoot
4
OK OK OK OK
113