Table of Contents
Advertisement
Item
Name
Calibration Port
Power Input Connector
Handstrap Location
Equipment Outlet
Table 3. Side-Panel Connections
Port for calibrating the instrument. (Located under the holster.) For use by
authorized service center only.
A grounded male three-prong (IEC 60320 C19 or C13) connector that accepts
the line-power cord.
The slots used to attach the handstrap to the analyzer, see Figure 3.
Equipment outlet, specific to the version of the Analyzer, which provides a DUT
connection.
Electrical Safety Analyzer
Description
Instrument Familiarization
7
Advertisement
Table of Contents
