Advertisement
Note: Make sure that the After-Clean tray is placed in the baseplate and that
the temperature in the room where the appliance is stored, charged and cleaned
is between 5 °C and 35 °C.
Note: you can store the cleaning brush in the After-Clean tray as well.
1 To assemble the appliance, insert the handle into the main body ('click').
2 To store the appliance, you can place it in the After-Clean & Storage station.
Slide the appliance on to the appliance holder so that the end of the
appliance holder sticks into the appliance.
If you need to disassemble the appliance again, follow the steps below:
1 Insert a pin/flat screwdriver into the hole in the back of the appliance and
pull up the handle.
2 Pull the handle out of the appliance while continuing to push the screwdriver
into the hole.
English
7
Advertisement
