Advertisement
English
22
Information code
Cause
The dirty water tank is full.
The AquaSpin nozzle is stuck.
This is a safety cut-off if
something is stuck in the nozzle
(for instance, a power cable or
a toy).
The air inlet openings are
blocked.
Unplug for use.
The wrong charger is
connected.
Solution
Empty the dirty water tank.
Check the brushes, bearings, motor parts,
and caps for hair or other obstacles and
remove them. If there are no obstacles,
switching the appliance off and on might
solve the problem.
Check the air inlet openings for blockages
and remove them. If this does not solve the
problem, check the whole air passage for
blockages and remove them. This refers to
the nozzle, tube, and the wet filter.
Unplug the appliance for use. Otherwise, it
will not switch on. Only plug in the
appliance during charging and
AUTOCLEAN.
Only charge the appliance with the adapter
supplied. Only use 34V adapter
S036-1A340100HE. The corresponding
adapter number can be found on the
adapter.
Advertisement
