Philips AquaTrio Cordless 7000 Manual page 13

Cleaning the appliance
AUTOCLEAN after every use
To prevent odors and scale deposits, use the AUTOCLEAN function after every
use. The AUTOCLEAN mode helps you to clean your full appliance in
approximately 4 minutes.
1 Place the appliance in the After-Clean & Storage station. Slide the appliance
on to the appliance holder so that the end of the appliance holder sticks into
the appliance.
Note: Empty the dirty water tank if the water level is above the
AUTOCLEAN indication. Otherwise, you can skip the following steps and
move forward to step 6.
2 Push the button to unlock the dirty water tank and remove it.
3 Remove the wet filter from the dirty water tank.
English
13