Advertisement
Cleaning the AquaSpin nozzle
1 Turn the microfiber brushes counterclockwise (1) and remove them from the
AquaSpin nozzle (2).
Tip: In case a microfiber brush is difficult to remove, you can use the
cleaning brush handle to unlock the microfiber brush.
2 You can remove entangled hair or threads from the microfiber brushes by
sliding down the microfiber brushes with one hand.
Tip: You can also use a pair of scissors to cut hairs and threads that have
become entangled around the microfiber brushes.
Removing blockages from the appliance
The appliance may become clogged. You may notice this when more water gets
on the floor than usual or when bigger dirt particles are no longer sucked up and
fall back on the floor. Below you can find the instructions to remove blockages
from different parts of the appliance.
Clearing blockages from the main body
If there is a blockage in the appliance, first switch off the appliance and remove
the dirty water tank. Then remove the blockage by moving the cleaning brush up
and down in the suction channel of the main body.
English
19
Advertisement
