Getting Command Help From The Serial Console - Cisco 1120 Installation Manual

Chapter 4 Administering the Cisco 1120 Secure Access Control Server
To restart an ACS service:
Log in to the CSACS 1120. For more information, see
Step 1
Console.
At the system prompt, enter
Step 2
you want to restart, and press Enter.
Tip
Result: The console displays:
[service name] is stopping. . .
[service name] is not running
[service name] is starting
[service name] is running

Getting Command Help from the Serial Console

To obtain a list and description of commands on the CSACS 1120 from the serial console:
Log in to the CSACS 1120. For more information, see
Step 1
Console.
At the system prompt, enter
Step 2
Tip
Result: The console displays the list of commands and their descriptions, as shown in
Table 4-1
Command
?
unlock guiadmin
remove guiadmin
add guiadmin
backup
download
exit
exportgroups
exportlogs
exportusers
help
OL-19455-01
restart
You can list more than one service to restart; enter a single space between each.
, and press Enter.
help
Press Enter again to scroll through the list of commands, as necessary.
CSACS 1120 Commands
Logging In to the CSACS 1120 from a Serial
followed by a single space and the name of the ACS service that
Logging In to the CSACS 1120 from a Serial
Description
List commands
Unlock GUI administrator
Remove GUI administrator
Adds a GUI administrator account that allows
access to the SE using the ACS web GUI.
Back up appliance
Download ACS Install Package
Log off
Export group information to an FTP server
Export appliance diagnostic logs to FTP server
Export user information to an FTP server
List commands
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
Basic Command Line Administration Tasks
Table 4-1.
4-7