Logging In To The Csacs 1120 From A Serial Console; Shutting Down The Csacs 1120 From A Serial Console; Logging Off The Csacs 1120 From A Serial Console - Cisco 1120 Installation Manual

Basic Command Line Administration Tasks

Logging In to the CSACS 1120 from a Serial Console

To log in to the CASACS 1120 from a serial console:
Establish a serial console connection to the CSACS 1120. For details, see
Step 1
At the
Step 2
At the
Step 3
Result: The system prompt appears:
name
Note Only one set of login credentials (administrator name and password) has the serial connection privilege.

Shutting Down the CSACS 1120 from a Serial Console

You can use the serial console to shut down the CSACS 1120.
Powering off the CSACS 1120 by using only the power switch may cause the loss or corruption of data.
Caution
To use the serial console to shut down the:
Log in to the CSACS 1120. For more information, see
Step 1
Console.
At the system prompt, enter
Step 2
At the
Step 3
Result: The console displays:
It is now safe to turn off the computer
Step 4 Press the power switch and hold it down for 4 seconds to turn off the CSACS 1120.
For the location of the power switch see
Result: The CSACS 1120 powers OFF.

Logging Off the CSACS 1120 from a Serial Console

To log off the CSACS 1120 from a serial console:
At the system prompt, enter
Result: The serial console connection closes, and the
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
4-2
prompt, enter the administrator name, and press Enter.
login:
prompt, enter the password, and press Enter.
password:
shutdown
Are you sure you want to shut down? (Y/N):
exit
Chapter 4 Administering the Cisco 1120 Secure Access Control Server
Logging In to the CSACS 1120 from a Serial
, and press Enter.
prompt, enter
Figure 1-2.
, and press Enter.
login
Configuring CSACS
for yes, and press Enter.
Y
prompt appears.
1120.
OL-19455-01