Unpacking And Checking The Contents Of Your Shipment - Cisco 1120 Installation Manual

Preparing Your Site for Installation
4.
5.
6.
7.
8.
9.
10.
11.
12.

Unpacking and Checking the Contents of Your Shipment

The shipping package for the CSACS 1120 Series appliance is designed to reduce the possibility of
product damage associated with routine material handling experienced during shipment. To reduce the
potential for damage to the product, transport the appliance in its original Cisco packaging. Failure to
do so may result in damage to the appliance. Also, do not remove the appliance from its shipping
container until you are ready to install it.
The appliance, cables, and any optional equipment you ordered may be shipped in more than one
container. When you unpack the containers, check the packing list to ensure that you received all the
parts listed in
Do not discard the packaging materials used in shipping your CSACS 1120 Series appliance. You will
Note
need the packaging materials in the future if you move or ship your appliance.
Table 2-2
Notes
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
2-10
Schedule time for installation.
Determine any space requirements.
Determine any power requirements.
Identify any required procedures or tests.
On an equipment plan, make a preliminary decision that locates each CSACS 1120 Series appliance
that you plan to install.
Read this hardware installation guide.
Verify the list of replaceable parts for installation (screws, bolts, washers, and so on) so that the parts
are identified.
Check the required tools list to make sure the necessary tools and test equipment are available. For
more information, see Required Tools and Equipment, page
Perform the installation.
Table 2-2. A Notes section has been provided to record damaged or missing items.
CSACS 1120 Series Appliance Packing List
Item
Cisco 1120 Secure Access Control Server Series appliance
4-post server rack-mount kit (for kit contents, see
Rack-Mount Hardware Kit, page
Cisco Information Packet
Cisco 90-Day Limited Hardware Warranty Terms
Regulatory Compliance and Safety Information for the Cisco
1120 Secure Access Control Server 4.2
Installation Guide for the Cisco 1120 Secure Access Control
Server 4.2
2-12.
4-Post
3-3.)
Chapter 2 Preparing for Installation
Cisco Part Number
CSACS-1120-K9
CSACS-1U-RAILS
78-5235-03G0
78-5236-01C0
78-19077-01
OL-19455-01
OL-19455-01