Upgrade Procedure; Performing A Full Upgrade From Acs Se 3.3.3 To Acs Se - Cisco 1120 Installation Manual

Upgrade Procedure

Upgrade Procedure
This section contains:
•
•
•

Performing a Full Upgrade from ACS SE 3.3.3 to ACS SE 4.1

You can use the ACS upgrade mechanism to upgrade from ACS SE 3.3.3, 3.3.4, 4.0.1 to ACS SE
4.1.1.24. This section describes the procedure for performing a full upgrade from ACS SE 3.3.3 to ACS
SE 4.1. using the upgrade package mechanism.
You can follow the same procedure for all upgrades mentioned in
Note
Before You Begin
Back up your existing data and configuration. The first back up is for ensuring that you have the 3.3.3
original data backed up.
Caution Back up and restore are supported and tested only when done on the same version. For example, back
up on 4.1 and restore on 4.1 is supported; not back up on 3.3.3 and restore on 4.1. However, there is an
exception to ACS 4.2 as you can restore the 4.1 configuration after upgrading to 4.2.
To upgrade ACS SE 3.3.3 to ACS SE 4.1:
Step 1 Obtain the ACS SE 4.1.1.24 upgrade CD.
Step 2 If the ACS SE is running CSAgent, you must disable the CSAgent service before upgrading. You can
do so at the console or in the web interface (ACS GUI). Using the:
•
•
If you do not have a GUI administrator account on the ACS SE, create a new GUI administrator account
Step 3
from the web interface:
a.
b.
c.
d.
Installation Guide for the Cisco 1120 Secure Access Control Server 4.2
5-6
Performing a Full Upgrade from ACS SE 3.3.3 to ACS SE
Reimaging the CSACS 1120 with the ACS 4.2 Recovery
Restoring the ACS SE 4.1.1.24
Console, enter . If the CSAgent service is running, enter
show
Web interface, choose System Configuration > Appliance Configuration and verify that the CSA
Enabled check box is unchecked. If it is checked, then uncheck the CSA Enabled check box and
click Submit.
Start the web interface.
Click Administration Control.
The Administration Control page opens.
Click Add Administrator.
The Add Administrator page opens.
Add a new administrator and grant all administrative privileges to the administrator.
Chapter 5 Upgrading and Migrating to Cisco 1120 Secure Access Control Server
DVD.
Configuration.
4.1.
Table 5-1.
.
stop csagent
OL-19455-01