Bios Setup, Os Tuning, And Security Manager Tuning (These Were Done By Cisco Before Shipment Of The Bundle To You) - Cisco UCS C Series Quick Start Manual

BIOS Setup, OS Tuning, and Security Manager Tuning (these were done by Cisco before shipment of the Bundle to you)

Do not update the BIOS; BIOS setup was done by Cisco before shipment of the Bundle to you; see
Step 8
Setup, OS Tuning, and Security Manager Tuning (these were done by Cisco before shipment of the
Bundle to you), page
Do not update the CIMC firmware.
Step 9
Step 10 Use the default username and password to log on to the OS; see
Step 11 Activate Windows. For more information, see
Step 12 Assign a static IP address to the server; see
(Optional) Change the hostname; see
Step 13
Ensure that required ports are enabled and available for use by Security Manager and its associated
Step 14
applications on your server so that the server can communicate with clients and servers running
associated applications. For detailed information, refer to "Required Services and Ports" in the
"Requirements and Dependencies" chapter of the Installation Guide for Cisco Security Manager 4.3 at
the following URL:
http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_ma
nager/4.3/installation/guide/requirem.html#wp1060450.
Use the default username and password to log on to Cisco Security Manager; see
Step 15
Passwords, page
Step 16 Install the Cisco Security Manager license; see the "Updating Security Manager" section of the
"Installing and Upgrading Server Applications" chapter of the Installation Guide for Cisco Security
Manager 4.3 at the following URL:
http://www.cisco.com/en/US/docs/security/security_management/cisco_security_manager/security_ma
nager/4.3/installation/guide/inserver.html#wp1053144.
Your Cisco Security Manager license is provided in paper format and is packed in your shipping carton
Caution
along with your new Bundle itself. Please take care that it is not inadvertently discarded or lost.
Refer, as needed, to the
Step 17
BIOS Setup, OS Tuning, and Security Manager Tuning (these
were done by Cisco before shipment of the Bundle to you)
Before your new Bundle was shipped to you, Cisco set up the BIOS on the server, installed and tuned
the operating system, and installed and tuned Security Manager.
BIOS settings done in the Cisco UCS server (these were done by Cisco before shipment of the Bundle to
you):
•
•
•
RAID configuration (this was done by Cisco before shipment of the Bundle to you):
•
OS tuning and changes done in the Cisco UCS server (these were done by Cisco before shipment of the
Bundle to you):
•
Cisco Security Manager 4.3 UCS Server Bundles Quick Start Guide
4
4.
6.
Related Documentation
Intel Hyper-Threading Technology enabled.
Virtualization disabled.
Mass Storage Controllers Configuration selected.
Hardware RAID controller configured, with RAID 5 set up.
Disk cache policy configured.
Windows Activation, Product Key, and EULA, page 7
Assigning an IP Address, page
Changing the Hostname, page
section of this "Quick Start Guide."
Usernames and Passwords, page
8.
9.
Usernames and
BIOS
6.
78-21007-01