Power Backup Operation - Panasonic KX-TGF943 Operating Instructions Manual

Making/Answering Calls
Answering an intercom call
Handset
1
Press M N to answer the page.
2
When you finish talking, press MOFFN.
Base unit
1
Press MSP-PHONEN to answer the page.
2
When you finish talking, press
MSP-PHONEN.
Turning auto intercom on/off
This feature allows the handset or base unit to
answer intercom calls automatically when it is
called. You do not need to press M
handset or MSP-PHONEN on the base unit.
When this feature is set to "On", the
monitoring handset or base unit for the baby
monitor feature (page 47) will also answer
baby monitor calls automatically. The default
setting is "Off".
Handset / Base unit
1
MMENUN#273
2
MbN: Select the desired setting. a
MSAVEN
3
Proceed with the operation for your unit
Handset: MOFFN
Base unit: MEXITN
Note:
R This feature is not available for all handsets
paging and voice paging even if it is turned
on.

Power backup operation

When a power failure occurs, the charged
handset temporarily supplies power to the
base unit (power backup mode). This allows
you to make and receive calls using a handset
during a power failure. The base unit will not
perform any other functions. However, some
functions such as Caller ID and phonebook
are available only when using a handset other
than the handset supplying power to the base
For assistance, please visit http://shop.panasonic.com/support
22
TGF94x(en)_1007_ver014.pdf
unit. You can program "Power failure"
and the default setting is "Auto" (page 42).
Important:
R If a handset is not placed on the base unit
R Power backup mode will not work if the
R Do not lift the power supplying handset
Ni-MH battery performance (supplied
batteries) during power backup mode
N on the
When the batteries are fully charged,
operating time of the handset in power backup
mode varies depending on usage.
– Continuous use of the handset in power
– Continuous use of the handset other than a
– Not in use in power backup mode: 1.5
Making calls during a power
failure
n When only 1 handset is registered:
n When 2 or more handsets are registered:
22
when a power failure occurs, "Power
outage Press OFF" is displayed. After
pressing MOFFN on the handset, place it on
the base unit to start power backup mode.
battery level of the power supplying
handset is or .
from the base unit during power backup
mode.
backup mode: 1 hours max.
handset in power backup mode: 1.5 hours
max.
hours max.
1
Lift the handset and dial the phone
number.
2
Within 1 minute, place the handset on
the base unit.
R Wait until speakerphone is turned
on automatically and the call is
made.
3
When the other party answers the call,
keep the handset on the base unit and
talk using the speakerphone.
4
When you finish talking, press MOFFN.
You should leave one handset on the base
unit for supplying the power, and use
another handset for making calls.
2022/10/07 15:47:29