Panasonic KX-TGF943 Operating Instructions Manual page 64

Useful Information
Call block
Problem
The dedicated key for
Telemarketing call block is not
displayed.
Caller ID/Talking Caller ID
Problem
Caller information is not
displayed.
Caller information is displayed
or announced late.
Caller information is not
announced.
The caller list/incoming phone
numbers are not edited
automatically.
I cannot dial the phone number
edited in the caller list.
For assistance, please visit http://shop.panasonic.com/support
64
TGF94x(en)_1007_ver014.pdf
Cause/solution
R While on the charger, the MTELE.BLK.N key is not
available. Lift the handset from the charger.
R If the Auto talk feature is set to on, the call is answered
automatically when the handset is lifted from the charger
during an incoming call. Turn off the auto talk feature
(page 41).
Cause/solution
R You must subscribe to Caller ID service. Contact your
phone service provider for details.
R If your unit is connected to any additional telephone
equipment such as a Caller ID box or cordless telephone
line jack, plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
R The name display service may not be available in some
areas. Contact your phone service provider for details.
R Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
R Depending on your phone service provider, the unit may
display or announce the caller's information at the 2nd
ring or later.
R Move closer to the base unit.
R The handset or base unit's ringer volume is turned off.
Adjust the ringer volume (page 39, 43).
R The Talking Caller ID feature is turned off. Turn it on
(page 39, 43).
R The number of rings for the answering system is set to "2
rings" or "Toll saver". Select a different setting
(page 57).
R Your unit does not announce caller information while the
other devices such as headset or handsets are engaged
in a call.
R The Caller ID number auto edit feature is turned off. Turn
it on and try again (page 41, 43).
R You need to call back the edited number to activate Caller
ID number auto edit.
R The phone number you dialed might have been edited
incorrectly (for example, the long distance "1" or the area
code is missing). Edit the phone number with another
pattern (page 50).
64 2022/10/07 15:47:34