Panasonic KX-TGF943 Operating Instructions Manual page 19

Base unit
1
Press MMUTEN during a call.
R The SP-PHONE indicator flashes.
2
To return to the call, press MMUTEN.
Note for handset and base unit:
R MMUTEN is a soft key visible on the display
during a call.
Flash
Handset / Base unit
MFLASHN allows you to use the special
features of your host PBX such as transferring
an extension call, or accessing optional
telephone services.
Note:
R To change the flash time, see page 41.
For call waiting or Call Waiting
Caller ID service users
To use call waiting or Call Waiting Caller ID,
you must first subscribe with your phone
service provider.
This feature allows you to receive calls while
you are already talking on the phone. If you
receive a call while on the phone, you will hear
a call waiting tone.
If you subscribe to both Caller ID and Call
Waiting with Caller ID services, the 2nd
caller's information is displayed on the unit
that is in use after you hear the call waiting
tone.
Handset / Base unit
1
Press MFLASHN to answer the 2nd call.
2
To switch between calls, press MFLASHN.
Note:
R Please contact your phone service provider
for details and availability of this service in
your area.
For assistance, please visit http://shop.panasonic.com/support
TGF94x(en)_1007_ver014.pdf
Temporary tone dialing (for
rotary/pulse service users)
Press * before entering access numbers
which require tone dialing.
Handset noise reduction
This feature allows you to hear the voice of
the person you are talking to more clearly, by
reducing the surrounding noise coming from
the other party's telephone.
1
2
Note:
R Depending on the environment where this
R This feature is not available while using the
Handset equalizer
This feature clarifies the voice of the person
you are talking to, producing a more
natural-sounding voice that is easier to hear
and understand.
1
2
3
4
Note:
R Depending on the condition and quality of
R This feature is not available while using the
R When both the "Equalizer" setting and
19
Making/Answering Calls
Handset / Base unit
Press MMENUN while talking.
MbN: "Noise reduction on" or
"Noise reduction off" a
MSELECTN
handset is being used, this feature may not
be effective.
speakerphone.
Press MMENUN while talking.
MbN: "Equalizer" a MSELECTN
MbN: Select the desired setting.
Press MOKN to exit.
your telephone line, this feature may
emphasize existing line noise. If it becomes
difficult to hear, select another setting.
speakerphone.
noise reduction are activated,
shown on the display.
is
19
2022/10/07 15:47:29