Telemarketing Call Block - Panasonic KX-TGF943 Operating Instructions Manual

– pre-recorded greeting message
Recording a greeting message for
automated call block
Using this feature, the unit can play your own
greeting message and pre-recorded greeting
message.
Example of your own greeting message:
"Hi, you have reached xxxxxxx (Name)."
"Thank you for your calling, You have reached
xxxxxxx (Name)."
"Hi, you have reached the xxxx (Name)
residence."
1
MMENUN#791
2
MbN: "Yes" a MSELECTN
3
After a beep sounds, hold the handset
about 20 cm (8 inches) away and speak
clearly into the microphone (2 minutes
max.).
4
Press MSTOPN to stop recording.
5
The unit will play the recorded greeting
message for automated call block. a
MOFFN
Resetting to the pre-recorded
greeting message for automated call
block
This procedure will erase your greeting
message for automated call block and reset to
the pre-recorded one.
1
MMENUN#793
2
MYESN a MOFFN
Playing back the greeting message
for automated call block
1
MMENUN#792
2
To exit, press MOFFN.

Telemarketing call block

In addition to Automated call block (page 29),
you can use Telemarketing call block to
For assistance, please visit http://shop.panasonic.com/support
TGF94x(en)_1007_ver014.pdf
further screen calls to stop telemarketer calls
from getting through.
Using this feature, you can ask callers to say
their names, and after checking the names,
you can decide whether to answer the calls or
not.
Note:
R While screening calls, the call waiting
Operating telemarketing call
block
1
2
*1
1
2
*1
31
Enhanced Call Block
feature is unavailable (page 19).
Handset
During an outside call, lift the handset
and then press MTELE.BLK.N.
R The unit prompts callers to say their
names.
To answer the call:
Press M N or MZN.
To block the call:
Press MCALL BLOCKN *1
R The unit announces that the call will be
disconnected, and disconnects the call.
R The caller will be registered to call
block list.
The user can still answer the call after
pressing MCALL BLOCKN. To answer the
call, press M N or MZN.
Base unit
Press MTELE.BLK.N during an outside
call.
R The unit prompts callers to say their
names.
To answer the call:
Press MSP-PHONEN.
To block the call:
*1
Press MCALL BLOCKN
R The unit announces that the call will be
disconnected, and disconnects the call.
R The caller will be registered to call
block list.
The user can still answer the call after
pressing MCALL BLOCKN. To answer the
call, press MSP-PHONEN.
a MYESN.
a MYESN.
31
2022/10/07 15:47:30