Panasonic KX-TGF943 Operating Instructions Manual page 65

Problem
Time on the unit has shifted.
The 2nd caller's information is
not displayed during an outside
call.
Answering system
Problem
The unit does not record new
messages.
I cannot operate the answering
system remotely.
For assistance, please visit http://shop.panasonic.com/support
TGF94x(en)_1007_ver014.pdf
Cause/solution
R Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to "Manual"
(off) (page 39).
R In order to use Caller ID, call waiting, or Call Waiting
Caller ID (CWID), you must first contact your phone
service provider and subscribe to the desired service.
After subscribing, you may need to contact your phone
service provider again to activate this specific service,
even if you already subscribed to both Caller ID and Call
Waiting with Caller ID services (CWID).
Cause/solution
R The answering system is turned off. Turn it on (page 52).
R The message memory is full. Erase unnecessary
messages (page 53, 54).
R The recording time is set to "Greeting only". Change
the setting (page 57).
R Your phone service provider's voicemail service may be
answering your calls before the unit's answering system
can answer your calls. Change the unit's number of rings
setting (page 57) to a lower value, or contact your phone
service provider.
R The answering system will not answer incoming calls
while the other devices such as headset or handsets are
engaged in a call.
R The remote access code is not set. Set the remote
access code (page 56).
R You are entering the wrong remote access code. If you
have forgotten your remote access code, enter the
remote access code setting to check your current code
(page 56).
R The answering system is turned off. Turn it on (page 57).
65
Useful Information
65
2022/10/07 15:47:35