C And °F; Min, Max, Avg, Differential; Alarm - Fluke 568 EX User Manual

3. Push the Enter softkey to choose the necessary material.
To manually type the typical emissivity of a material:
1. Push the No. softkey.
2. Use the down or up arrow softkey to change the entry. Hold
down the arrow softkeys to increase the rate of change.
3. Push the Done softkey to return to the main menu.
° °
C and F
To toggle between °C and °F measurements, push the Menu
softkey until °C or °F shows as the left softkey, and then push the
necessary softkey.

Min, Max, Avg, Differential

The Product can measure minimum (MIN), maximum (MAX),
average (AVG), or differential (∆) temperatures. The Product does
not show these values if a thermocouple is connected to it.
To turn on the Min/Max and Avg/Diff modes:
1. Push the Menu softkey until MnMx shows as the left softkey
and Avg shows as the right softkey.
2. Push the MnMx softkey and the Avg softkey.

Alarm

The Product has a programmable high and low temperature alarm
to assign high or low readings. When the alarm level is reached, an
alarm sounds and the display flashes orange and white.
Infrared Thermometer
Display
9