Table of Contents
Advertisement
Refilling Ink Tanks
When remaining ink cautions or errors occur, the Alarm lamp flashes to inform you of the error. In this state,
the printer cannot print. Check the remaining ink level with the ink tank indicator on the front of the printer. If
the ink level is near the lower limit line (A), refill the ink tank.
Important
•
• To continue using the printer without disabling the empty ink tank notification function, reset the
remaining ink level count of the refilled ink.
Reset the ink level count to 50% when refilling an ink tank to the middle line, or 100% when refilling an
ink tank to the upper limit line. Otherwise, the remaining ink level will not be detected correctly.
From Windows
Changing the remaining ink level notification setting
From another operating system
Handling Printer Configuration Using the Web Browser
• If the remaining ink level notification function is disabled, visually inspect the remaining ink and refill the
ink tanks as necessary. Continuing printing with ink below the lower limit line of an ink tank may prevent
satisfactory print quality.
Note
• If print results become faint or streaks appear despite sufficient ink levels, see
•
•
• For precautionary notes on handling ink bottles, see
Refilling Procedure
When you refill ink tanks, follow the steps below.
Important
•
• Please ensure the printer remains flat after initial setup and is NOT turned upside down or on its side,
as ink in the printer may leak.
1.
1.
Check that printer is turned on.
2. Open the scanning unit / cover (B).
2.
Notes on ink
bottles.
91
Maintenance
Procedure.
Advertisement
Table of Contents
