Canon G3030 Series Online Manual page 408

Hide thumbs Also See for G3030 Series:
Table of Contents

Advertisement

8
Maintenance cartridge is not installed.
The maintenance cartridge may not be installed
properly or may not be compatible with this print-
er.
9
There may be paper left inside the printer.
10
Unable to proceed with print head replacement
because the maintenance cartridge is almost full.
11
Cannot perform printing with current print set-
tings.
12
Business card-sized paper is not loaded.
14
The print head may not be installed properly or
may not be compatible with this printer.
15
The print head may not be installed properly or
may not be compatible with this printer.
17
The maintenance cartridge is almost full.
18
The maintenance cartridge is full.
19
Trying to start copying before you register the
paper information.
20
A maintenance cartridge that has been installed
in another printer is installed.
22
The ink absorber for borderless printing is almost
full.
1723
If you are operating from a computer, refer to the
page corresponding to the support code displayed
on your computer screen.
1496
1725
If you are operating from the printer's operation
panel, refer to the following page.
1725
What to Do When Paper Is Jammed While
Printing Business Cards
1372
Refer to the page corresponding to the support
code displayed on your computer screen.
4103
4104
410D
What to Do When Paper Is Jammed While
Printing Business Cards
1473
1472
1727
1726
Select the paper information using the Paper Se-
lect button and press the printer's OK button to
cancel the error.
To register the paper information (paper size and
media type) that cannot be selected using the Pa-
per Select button, press the printer's Stop button
to cancel copying, then use the Remote UI to regis-
ter the paper information and retry copying.
1724
If you are operating from a computer, refer to the
page corresponding to the support code displayed
on your computer screen.
1719
408

Advertisement

Table of Contents
loading

Table of Contents