Table of Contents
Advertisement
2900
Cause
Scanning print head alignment sheet failed.
What to Do
Press the printer's OK button to cancel the error and take the corresponding actions below.
• Make sure the print head alignment sheet is set in the correct position and orientation on the platen.
• Make sure the platen and the print head alignment sheet are not dirty.
• Load A4 or Letter size plain paper in the rear tray.
• Check the print head condition by printing the nozzle check pattern.
After carrying out the above actions, perform automatic print head alignment again.
If the error recurs after taking the above actions, press the printer's OK button to cancel the error and
perform manual print head alignment.
Adjusting Print Head Position Manually (Windows)
432
Advertisement
Table of Contents
