Table of Contents
Advertisement
23
IP address and subnet mask are conflicting.
25
An internal part will need replacing soon.
28
The ink absorber for borderless printing is full.
Lights
An error occurred while communicating via Wi-Fi
or while in standby.
Cannot connect to network.
Cannot connect to Internet.
Cannot connect to server.
Failed in connecting to Internet because network
connection is being prepared.
Failed in acquiring contents.
Scanning print head alignment sheet failed.
Replace Ink in Print Head cannot be performed
because the maintenance cartridge is almost full.
The remaining ink level in one of the ink tanks
may have reached the lower limit line shown on
the ink tank.
Scanning original has failed.
Unexpected error occurred while scanning is in
progress.
171A
If you are operating from the printer's operation
panel, refer to the following page.
1719
3446
2200
If you are operating from a computer, refer to the
page corresponding to the support code displayed
on your computer screen.
1717
1718
If you are operating from the printer's operation
panel, refer to the following page.
1717
495A
Press the printer's OK button to cancel the error.
Check the LAN connection and network settings,
turn off the printer and turn it back on, and then
perform setup again.
Press the printer's OK button to cancel the error.
Check the wireless router settings.
Press the printer's OK button to cancel the error
and perform operations again after a while.
Press the printer's OK button to cancel the error
and perform operations again after a while.
Press the printer's OK button to cancel the error
and perform operations again after a while.
2900
1368
1640
3412
Press the printer's OK button to cancel the error.
Change settings and perform operations again.
409
Advertisement
Table of Contents
