Canon G3030 Series Online Manual page 418

Hide thumbs Also See for G3030 Series:
Table of Contents

Advertisement

9.
9. Plug printer back in and turn printer back on.
10.
10. Load paper.
Loading Photo Paper / Plain Paper
Loading Envelopes
Note
• Make sure you are using suitable paper and loading it correctly.
• We recommend using paper sizes other than A5 to print documents with photos or graphics. A5
paper may curl and jam as it leaves the printer.
11. Redo printing.
11.
All jobs in the print queue are canceled. Redo the printing.
Note
• If the 1300 error (Alarm lamp flashes 3 times) recurs, check the feed slot of the rear tray again.
If a foreign object is in the rear tray, refer to
Normally and take appropriate action.
If the measures above do not solve the problem, contact your nearest Canon service center to request a
repair.
Important
• Do not tilt the printer when moving it since the ink may leak out.
• When transporting the printer for repairing it, see Repairing Your Printer.
in What to Do If Paper Is Not Fed/Output
Check 1
418

Advertisement

Table of Contents
loading

Table of Contents