Table of Contents
Advertisement
Configuring the Channels
Channel 1, 2
1 .
Press the [
] or [
] button on the top panel.
The settings screen for the channel corresponding to the
button you pressed appears.
INPUT
Selecting an input source
1 .
Touch <INPUT>.
2 .
Touch one of the inputs from <GTR> to <OFF> to
select an input source.
Input source
Explanation
Guitar connected to the Guitar jack
* Only for channel 1
Mic, keyboard or audio equipment
,
connected to the MIC 1, 2 connectors
Select these when you want to use channels
1/2 as a stereo link.
When stereo link is turned on, the same
settings apply to both channels.
* Turning on stereo link also automatically
turns one of the channels off.
Headset mic
* You can set "HEADSET" for just one
channel.
Off (no used)
8
Setting the input gain
3 .
Use the GAIN control to adjust the input gain.
Turning phantom power on/off
4 .
Turn the +48V setting to "ON" when you connect a
condenser mic that needs phantom power.
EQ
1 .
Touch <EQ>.
2 .
Tap the EQ button to turn it ON (the button lights up
green).
3 .
Adjust the tonal character of each frequency band.
* For details on the parameters, refer to "Parameter Guide" (Roland
website).
Advertisement
Table of Contents
