Table of Contents
Advertisement
Operating the MENU Screen
Various settings on the MENU screen are shown here as a menu. To switch between screens, touch the menu item until the desired
settings screen appears.
1 .
On the home screen, touch <
The MENU screen appears.
2 .
Touch a button from <CHANNEL> to <SETUP> to
select a menu item.
3 .
To switch between screens, touch the menu item
until the desired settings screen appears.
4 .
Set the parameters.
CHANNEL/OUTPUT/PAD/FOOT SW
Item
Explanation
Sets the respective input channels.
CHANNEL
This is the same as "Configuring the Channels" (p. 8).
Configures the output-related settings.
OUTPUT
This is the same as "Output Settings" (p. 27).
Configures the effect pads.
PAD
This is the same as "Editing the Effect Pad Settings" (p.
21).
Specifies the function of the footswitch, expression
pedal or GA-FC connected to the FOOT SW jack.
FOOT SW
This is the same as "Using a Footswitch and Expression
Pedal" (p. 23).
> (MENU button).
SETUP
These are the overall system settings for the GCS-5.
DISPLAY
Parameter
Explanation
BRIGHTNESS
LCD
Adjusts the brightness of the display.
Adjusts the brightness of the buttons when the
LED ON
buttons are on.
Adjusts the brightness of the buttons when the
LED OFF
buttons are off.
Sets how the channel edit buttons and the OUTPUT
EDIT SW
edit button lights up.
Sets the clip display level for the level meter shown
CLIP LEVEL
on the home screen.
USB
Parameter
Explanation
This specifies the operating mode for the audio.
Operates with stereo input/output.
2 MIX
This uses the standard driver of the
respective OS.
Operates with multitrack input/output.
This uses a dedicated driver.
MTK-
This is a mode for recording that lets you
RECORD
switch between different sampling rates.
AUDIO MODE
Useful when recording with a DAW or
other software.
Operates with multitrack input/output.
This uses a dedicated driver.
When using this unit with a Mac, this
MTK-
mode lets you select each channel
STREAM
individually.
This is handy when using apps for
conversation and the like.
When outputting in multitrack, this sets which
MULTITRACK
signal to output.
Specifies the transmit/receive channel for MIDI
MIDI CH
data.
GENERAL
Parameter
Explanation
VERSION
Displays the version of the system program.
DATE & TIME
Sets the date and time.
BACKUP
Backs up the GCS-5's data to your computer.
FACTORY
Returns the unit to its factory defaults.
RESET
31
Advertisement
Table of Contents
