Table of Contents
Advertisement
Configuring the Channels
INSTRUMENT Channel
This channel handles the signal from a keyboard or audio device connected to the
1 .
Press the [
] button on the top panel.
INPUT
Selecting an input source
1 .
Touch <INPUT>.
2 .
Touch one of the inputs from <INST> to <OFF> to
select an input source.
Input source
Explanation
Keyboard or audio equipment connected to
the INST L, R jacks
Headset mic
* You can set "HEADSET" for just one channel.
Off (no used)
Setting the input gain
3 .
Use the GAIN control to adjust the input gain.
10
(INST) L, R jacks.
EQ
1 .
Touch <EQ>.
2 .
Tap the EQ button to turn it ON (the button lights up
green).
3 .
Adjust the tonal character of each frequency band.
* For details on the parameters, refer to "Parameter Guide" (Roland
website).
EFFECTS
1 .
Touch <EFFECTS>.
2 .
Tap the EFFECTS button to turn it ON (the button
lights up green).
Selecting a category
3 .
Touch the EFFECTS CATEGORY button and then
select an effect category.
Category
Explanation
TALK
Selects effect patches for conversations.
This effect is shared between channel 1–
INSTRUMENT channel.
CONSOLE
The parameters can be configured for each
channel.
* Edited settings are saved as-is.
Advertisement
Table of Contents
