Table of Contents
Advertisement
Configuring the Channels
USB Channel
This channel is used for USB audio signals from devices (such as a computer) that are connected to the ă (USB) port.
* When using this unit while AUDIO MODE (p. 31) is operating in multitrack (MTK-RECORD, MTK-STREAM), select the "CH USB" setting for the
computer's USB audio.
1 .
Press the [
] button on the top panel.
INPUT
1 .
Touch <GAIN>.
2 .
Use the GAIN control to adjust the input gain.
12
EQ
1 .
Touch <EQ>.
2 .
Tap the EQ button to turn it ON (the button lights up
green).
3 .
Adjust the tonal character of each frequency band.
* For details on the parameters, refer to "Parameter Guide" (Roland
website).
EFFECTS
You can use effects exclusively for the USB channel.
1 .
Touch <EFFECTS>.
The effect edit screen appears.
2 .
Tap the EFFECTS button to turn it ON (the button
lights up green).
3 .
Set the parameters.
¹ For details on edit operations, refer to "Editing the Effects" (p. 17).
¹ For details on the parameters, refer to "Parameter Guide" (Roland
website).
MEMO
Edited settings are saved as-is.
Advertisement
Table of Contents
