Table of Contents
Advertisement
Getting Ready
Screen (Touch Panel) Operations
Home screen
The screen that appears after you turn on the power is called the "home screen". On the home screen, you check the input/output levels.
You can also touch the buttons shown on the screen to switch between input/output channels and settings screens for each function.
TUNER button
Shows the TUNER screen.
Use this feature to tune your
instrument.
Phantom power: ON
Channels for which phantom
power is being used are marked
with a "Á".
¹ Touch the respective channel and the OUTPUT icon to open the window where you can switch between effect patches and view the edit
screens.
6
Date/time display
Touch this to switch to the date and time settings
screen.
The view changes according to the input source set for
each channel.
à Channel 1–2, INSTRUMENT channel
Switches between effect patches.
à USB–SOUND PAD channel, OUTPUT
Talkback button
When this is on (lit up), the audio
input from the headset mic is output
only to the PHONES jacks (talkback).
Use this to communicate only with
the people who are recording with
you.
MENU button
Accesses the MENU screen.
Level meter
Shows the levels for each channel.
These are the pre-mix levels before
the signal passes through the input
gain, EQ and effects.
The OUTPUT level meters show the
post-mix output levels.
Switches to the edit screen for the
effect patch.
Switches to the effect edit screen.
Advertisement
Table of Contents
