Table of Contents
Advertisement
Output Settings
EFFECTS
This shows you how to apply effects to the output audio.
COMP
1 .
Touch <COMP>.
2 .
Set the parameters.
Parameter
Explanation
Sets the compressor depth.
COMP
When this is "OFF", no compressor effect is
applied.
TONE
Adjusts the tonal character of the compressor.
Larger values make the compressor take effect in
NATURAL
a more natural way.
REVERB
1 .
Touch <REVERB>.
2 .
Set the parameters.
Parameter
Explanation
TIME
Adjusts the length (time) of reverberation.
TONE
Adjusts the tonal character of the reverb.
LEVEL
Adjusts the volume of the reverb sound.
On the home screen, touch an icon corresponding to OUTPUT to
open the window.
Touch <
> to display the EFFECTS screen.
30
GENERAL
1 .
Touch <GENERAL>.
2 .
Set the parameters.
Parameter
Explanation
A common KEY and BPM are set for the effect
KEY
patches (channel 1–INSTRUMENT channel)
and for the dedicated effects (USB through
BPM
BLUETOOTH channels).
Selects whether to set the KEY and BPM as
KEY PREF
GENERAL (SYSTEM) settings, or whether to use
BPM PRF
the effect patch settings for CH1.
GENERAL
1 .
Set the parameters.
Parameter
Explanation
STREAM
Use this to adjust any delays that occur between
DELAY
the video and audio.
DELAYED
Sets the output destination for the audio that's
OUT
adjusted in STREAM DELAY.
Sets the output for which volume adjustment is
FADER
enabled for the OUTPUT fader.
Determines whether to use the same EQ settings
EQ
for the MAIN OUT and headphones 1–2 jacks, or
whether to set them individually.
Sets whether to enable or disable volume
adjustment of each channel fader, for the audio
MONITOR
that's output from the headphones jacks 1–2 and
USB MONITOR.
Sets whether to return the input sound from the
HEDSET MIX
headset mic to headphones jack 1 (ON) or not
MINUS
(OFF).
Advertisement
Table of Contents
