Table of Contents
Advertisement
Using a Footswitch and Expression Pedal
GA-FC Settings
There are four groups (A–D) each for the switches (PEDAL 1–6) and the expression pedals (EXP 1, 2). You can assign functions to each
group and control them at the same time.
1 .
Select "GA-FC" for the "Specifying a Foot Controller"
(p. 24) operation.
2 .
Touch <GA-FC>.
3 .
Touch a control from <PEDAL1> to <EXP2> to select
the switch or expression pedal for which you want
to set the function.
The setting screen appears.
4 .
Touch <A>–<D> to select a group.
5 .
Edits the parameter's value.
* The settings you edit are saved as-is.
26
PEDAL1–6
Function
Explanation
Select the category.
CATEGORY
The functions you can select are different for each
category.
Specifies the function that's assigned to the
switches.
FUNCTION
Set this to "OFF" if you don't want to specify a
function.
TOGGLE
MODE
MOMENT
Sets the lower limit (MIN) and the upper limit (MAX)
MIN
of the variable range for the parameter.
* The value changes depending on the function
MAX
assigned.
EXP1–2
Function
Explanation
Select the category.
CATEGORY
The functions you can select are different for each
category.
Specifies the function that's assigned to the
expression pedals.
FUNCTION
Set this to "OFF" if you don't want to specify a
function.
Sets the lower limit (MIN) and the upper limit (MAX)
of the variable range for the parameter.
MIN
The MIN setting is for when the pedal is fully raised,
and the MAX setting is for when the pedal is fully
advanced.
MAX
* The value changes depending on the function
assigned.
* For details on the parameters, refer to "Parameter Guide" (Roland
website).
This setting lets you toggle between
MIN and MAX values each time you
press a switch.
The MAX value is used while you are
pressing the switch.
Advertisement
Table of Contents
