Table of Contents
Advertisement
FEATURES
• Control of iris cameras (for enrollment and recognition)
Up to 3 iris cameras (2 external power supply devices for iris cameras) can be connected to a control unit.
This product cannot control both of iris cameras for enrollment and recognition at the same time. Refer to Administration
Software BM-ES500E Administrator's Guide.
• One-time capturing of both eyes enables recognition in approx. 3 seconds*
An iris camera captures the iris images of both eyes at the same time. A control unit generates iris data from the captured
iris images, and compares the data with that distributed to the control unit. If either of the iris data is corresponding with the
iris data distributed, you will be recognized as an enrolled user. The recognition time will be approx. 3 seconds (approx. 2
seconds for capturing and 1 second for recognition)*
1
*
The recognition time may differ depending on capturing conditions.
• Access control system can be composed.
Iris cameras, control units, and the administration PC can compose an access control system in combination with access
2
control panels*
and electric locks*
2
*
These devices are independent to BM-ED500.
• Supporting a common access control interface
Recognition result outputs support Wiegand, which is one of the interfaces commonly used for access control systems.
Any access control panel supporting the interface can be directly connected to the control unit. The control unit can also
output signals to RS-485 devices, as well as controlling Solenoid electric locks, if they are directly connected to the control
unit.
6
1
.
2
, etc.
Advertisement
Table of Contents
