I Installation - Panasonic BM-ED500 Operating Instructions Manual

I Installation

The following is the procedure to mount the control unit over the wall with the supplied mounting bracket.
When mounting, follow the procedure. After mounting the plate, secure the control unit to the mounting plate. Otherwise, it may
drop and cause damage or injury.
1. Attach the anchor into the wall and attach the supplied mounting bracket to the anchor.
Use an anchor bolt which meets the standards shown in the following figure.
Hit the anchor into the wall by referring the following figure.
10 mm {2/5 in.} or less
Mounting bracket
2 mm {2/25 in.} (D)
Wall Type
TAPMARK concrete screw anchors
Concrete wall Part No. 21230,
Size 6.35 x 57.15 mm {1/4 x 2 -1/4 in.}
TAPMARK concrete screw anchors
Plaster wall Part No. 21240,
Size 6.35 x 69.85 mm {1/4 x 2 -3/4 in.}
362.4
250
30 2-4M
4-φ20
Screw Type
13
(Unit of length: mm)
15