Table of Contents
Advertisement
8. Installation
8.1. AHU kit Installation
Mount AHU kit according to the following instructions.
* Attach AHU kit to Air Handling Unit body directly to avoid exposing wires of thermistors to
outside.
1. Install the bracket to the wall with
the screws.(Three screws)
3. Hang the kit on the bracket.
5. Open the front panel and fix the unit to the
wall with the screws.(4 screws)
2. Make two holes. (for wirings)
The position of wires holes of AHU kit
120mm
25mm
7mm
4. Remove the two screws on the right
side of the unit.
(Support the unit with your free hand
while removing the screws.)
7
6mm
113mm
70mm
300mm
Advertisement
Table of Contents
