When Check Digit is set to Validate and Transmit, the scanner only reads
Interleaved 2 of 5 barcodes printed with a check digit, and will transmit this digit at
the end of the scanned data. Default = No Check Digit.
* No Check Digit
Validate and Transmit
Interleaved 2 of 5 Message Length
Scan the barcodes below to change the message length. Refer to
Description
lengths = 2-80. Minimum Default = 4, Maximum Default = 80.
Minimum Message Length
102
on page 94 for additional information. Minimum and Maximum
Validate, but Don't Transmit
Message Length
Maximum Message Length
Vuquest 3320g User Guide