Interfunction Delay
An interfunction delay of up to 5000 milliseconds (in 5ms increments) may be
placed between the transmission of each control character in the message string.
Scan the Interfunction Delay barcode below, then scan the number of 5ms delays,
and the Save barcode from the
To remove this delay, scan the Interfunction Delay barcode, then set the number of
delays to 0. Scan the Save barcode using the
page 222.
Intermessage Delay
An intermessage delay of up to 5000 milliseconds (in 5ms increments) may be
placed between each scan transmission. Scan the Intermessage Delay barcode
below, then scan the number of 5ms delays, and the Save barcode from the
Programming
To remove this delay, scan the Intermessage Delay barcode, then set the number of
delays to 0. Scan the Save barcode from the
page 222.
66
Programming
Prefix
STX
1
Chart, beginning on page 222.
1st Scan Transmission
Intermessage Delay
Intermessage Delay
Chart, beginning on page 222.
Scanned Data
Suffix
HT
2 3 4 5
CR
Interfunction Delays
Interfunction Delay
Programming
2nd Scan Transmission
Programming
LF
Chart, beginning on
Chart, beginning on
Vuquest 3320g User Guide