Code 39 Code Page; Interleaved 2 Of 5; Interleaved 2 Of 5 On/Off; Check Digit - Honeywell Vuquest 3320g User Manual

Code 39 Code Page

Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the barcode below,
select the code page with which the barcodes were created (see
on page 211), and scan the value and the Save barcode from the
Chart,

Interleaved 2 of 5

Interleaved 2 of 5 On/Off

* On

Check Digit

No Check Digit indicates that the scanner reads and transmits barcode data with
or without a check digit.
When Check Digit is set to Validate, but Don't Transmit, the unit only reads
Interleaved 2 of 5 barcodes printed with a check digit, but will not transmit the
check digit with the scanned data.
Vuquest 3320g User Guide
beginning on page 222. The data characters should then appear properly.
< Default All Interleaved 2 of 5 Settings >
Code 39 Code Page
Symbology Charts
Programming
Off
101