Telepen; Telepen On/Off; Telepen Output; Telepen Message Length - Honeywell Vuquest 3320g User Manual

Telepen

Telepen On/Off

On

Telepen Output

Using AIM Telepen Output, the scanner reads symbols with start/stop pattern 1
and decodes them as standard full ASCII (start/stop pattern 1). When Original
Telepen Output is selected, the scanner reads symbols with start/stop pattern 1
and decodes them as compressed numeric with optional full ASCII (start/stop
pattern 2). Default = AIM Telepen Output.
* AIM Telepen Output

Telepen Message Length

Scan the barcodes below to change the message length. Refer to
Description
lengths = 1-60. Minimum Default = 1, Maximum Default = 60.
Minimum Message Length
Vuquest 3320g User Guide
<Default All Telepen Settings>
on page 94 for additional information. Minimum and Maximum
* Off
Original Telepen Output
Message Length
113