Table of Contents
Advertisement
6
Symbologies
This programming section contains the following menu selections.
• MaxiCode
• China Post (Hong Kong 2 of 5)
• Chinese Sensible (Han Xin) Code
• Codabar
• Codablock A
• Codablock F
• Code 11
• Code 11
• Code 32 Pharmaceutical (PARAF)
• Code 39
• Code 93
• Data Matrix
• EAN/JAN-13
• EAN/JAN-8
• GS1 Composite Codes
• GS1 DataBar Expanded
• GS1 DataBar Limited
• GS1 DataBar Omnidirectional
• GS1 Emulation
• GS1-128
Message Length Description
You are able to set the valid reading length of some of the bar code symbologies. If the data length of the scanned bar code
doesn't match the valid reading length, the scanner will issue an error tone. You may wish to set the same value for minimum
and maximum length to force the scanner to read fixed length bar code data. This helps reduce the chances of a misread.
EXAMPLE:
Decode only those bar codes with a count of 9-20 characters.
Min. length = 09Max. length = 20
EXAMPLE:
Decode only those bar codes with a count of 15 characters.
Min. length = 15Max. length = 15
For a value other than the minimum and maximum message length defaults, scan the bar codes included in the explanation of
the symbology, then scan the digit value of the message length and Save bar codes on the
cover of this manual. The minimum and maximum lengths and the defaults are included with the respective symbologies.
• Interleaved 2 of 5
• Korea Post
• Label Code
• Matrix 2 of 5
• MaxiCode
• MicroPDF417
• MSI
• NEC 2 of 5
• Postal Codes - 2D
• Postal Codes - 2D
• Label Code
• GS1 DataBar Omnidirectional
• QR Code
• Straight 2 of 5 IATA (two-bar start/stop)
• Straight 2 of 5 Industrial (three-bar start/stop)
• TCIF Linked Code 39 (TLC39)
• UPC-A
• UPC-A
• UPC-A/EAN-13 with Extended Coupon Code
• UPC-E0
• UPC-E1
Programming Chart
inside the back
6 - 1
Advertisement
Table of Contents
