Beeper Duration - Good Read; Led - Good Read; Number Of Beeps - Good Read; Number Of Beeps - Error - Honeywell Vuquest 3320g User Manual

Beeper Duration – Good Read
The beeper duration codes modify the length of the beep the scanner emits on a
good read. Default = Normal.
* Normal Beep
LED – Good Read
The LED indicator can be programmed On or Off in response to a good read.
Default = On.
* LED - Good Read On
Number of Beeps – Good Read
The number of beeps of a good read can be programmed from 1 - 9. The same
number of beeps will be applied to the beeper and LED in response to a good read.
For example, if you program this option to have five beeps, there will be five beeps
and five LED flashes in response to a good read. The beeps and LED flashes are in
sync with one another. To change the number of beeps, scan the barcode below
and then scan a digit (1-9) barcode and the Save barcode from the
Chart, beginning on page 222. Default = 1.
Number of Beeps – Error
The number of beeps and LED flashes emitted by the scanner for a bad read or
error can be programmed from 1 - 9. For example, if you program this option to
have five error beeps, there will be five error beeps and five LED flashes in response
36
Number of Good Read Beeps/LED Flashes
Short Beep Short Beep
LED - Good Read Off
Programming
Vuquest 3320g User Guide