To Stop The Product; To Set The Product To Off; To Charge The Battery - Husqvarna AUTOMOWER 320 NERA Operator's Manual

5.4 To stop the product

1. Push the STOP button to make the product and
the cutting motor stop.

5.5 To set the product to OFF

1. Push the STOP button to stop the product.
2. Enter the PIN code if it is necessary.
3. Push the jog wheel for 3 seconds to set the
product to OFF. You can also use the jog wheel
Power off in the menu in the display.
to select
4. Make sure that the LED indicator on the jog wheel
is not lit.

5.6 To charge the battery

When the product is new or after long-term storage, the
battery can be empty. Charge the battery before you
start the product. In the
cuts and charges automatically.
1. Set the product to ON.
2. Put the product into the charging station until the
charging plates touch the contact plates.
3. Do a check that the product charges in the display
of the product or in the Automower
26 - Operation
Main area mode, the product
®
Connect app.
2071 - 001 - 29.03.2023