U3025AE10
Equipment Required
The Agilent U3025AE10 requires that the user be familiar with the equipment and
components listed in
This section provides an equipment list and setup of the PNA and Test Set.
Table 13
Equipment List
Description
E8364B/C 2-Port Network Analyzer (Option 014 or 551) or
N5230A/C 2-Port Network Analyzer (Option 525 or 551)
N4693A ECal Module with a female connector, or a 2.4 mm Cal kit
(85056B, 85057D, etc.)
Set of interconnect cables (PNA and Test Set), see
Connections" on page
44
Table
13.
17.
"12-Port RF Cable
Operational Check
Qty
1
1
1
User's Guide