General Information
Incoming Inspection
Equipment Required but Not Supplied
Connector cleaning supplies and various electrostatic discharge (ESD) protection devices
are not supplied with the calibration kit but are required to ensure successful operation of
the kit. Refer to
Table 6-2 on page 6-4
for ordering information.
Incoming Inspection
Refer to
"Kit Contents" on page 1-2
to verify a complete shipment. Use
Table 1-1
to record
the serial numbers of all serialized devices in your kit.
Check for damage. The foam-lined storage case provides protection during shipping. If the
case or any device appears damaged, or if the shipment is incomplete, refer to
"Contacting
Agilent" on page
5-4. Agilent will arrange for repair or replacement of incomplete or
damaged shipments without waiting for a settlement from the transportation company.
See
"Returning a Kit or Device to Agilent" on page
5-3.
85052B
1-4