Yaesu FTM-500DR Operating Manual page 44

6. Press the
normal operation.
While operating in the GM function, the call sign and the signal strength of a maxi-
mum 24 stations with the GM function turned ON, and that are within the communi-
cation range, may be checked.
For details on how to set each item, refer to "FTM-500DR/DE GM Function Instruction
Manual" which is available on the Yaesu website.
The group members set the DG-ID number to "50"
DG-ID
TX50
(transmit)
RX50
(receive)
Only group members set to the same DG-ID
number may communicate.
42
key to turn the GM (Group Monitor) function OFF and return to the
DG-ID
TX50
(transmit)
RX50
(receive)
Setting the receive DG-ID number to
"00" so all the C4FM digital stations
signals may be received.
DG-ID
TX00
(transmit)
RX00
(receive)
DG-ID
TX90
(transmit)
RX90
(receive)
Stations setting the receive DG-ID number to a
number other than "00" may not receive the
signals that do not match the DG-ID number.
DG-ID
TX00
(transmit)
RX00
(receive)