Normal Mode (Manual Mode); Auto Mode - Yaesu FTM-500DR Operating Manual

Normal Mode (Manual Mode)

• Displays the current received signal in orange.
• Displays historical received signal strengths in gray (Press the DIAL knob to reset).
• Press the blinking area of the screen during Dual Receive, Dual Receive will be canceled and the
original PMG function will be restored.
Signals are
d i s p l a y e d
in the order
entered.
The currently selected
channel is displayed with
a wide bar graph.
Press and hold the DIAL knob while the PMG function is operating to enter PMG Auto
Mode. PMG Auto Mode automatically starts Dual Receive when a new signal is received on
another channel while the current Operating Channel is being received. In PMG Auto Mode,
automatically listen to the new signal that appears on another channel in Duel Receive while
also receiving the current Operating Channel, without looking at the screen.
Press and hold
the DIAL knob
Switch between
Auto Mode and
Manual Mode.

Auto Mode

• While in Dual Receive, the new signal frequency blinks on the Bar Graph. When there is no signal,
receive automatically returns to the original PMG function.
• Press the blinking area of the screen during Dual Receive, Dual Receive will be canceled and the
original PMG function will be restored.
Channels for which Dual Receive is canceled by touching the screen will not
automatically become Dual Receive until the signal is lost and a new signal is received.
In addition, changes in signal strength due to movement may be interpreted as new
signals, and canceled signals may be immediately received again at the same time. In
this case, press and hold the DIAL knob to switch to Manual Mode.
Rotate the
DIAL knob
Rotate the DIAL knob
to select the desired
Channel
Touch the bar
Dual receive at the
frequency touched
on the bar
Long Touch
the bar
Switch to the frequency of
the long touch on the bar
S-DX DISP
FTM - 500D
DIGITAL / ANALOG TRANSCEIVER
Press and hold
New signal in the
other channel
Dual Receive
automatically
Return to PMG
screen
Long Touch the
blinking area
Switch to the frequency of the
long touch on the blinking area
When the signal disappears, returns to PMG
screen automatically.
Touch the blinking area to return to PMG screen.
*Other operations are the same as manual mode.
Touch the
blinking area
Line under the bar graph
White
: Manual Mode
Orange : Auto Mode
15