Yaesu FTM-500DR Operating Manual page 51

• The character input screen is displayed. Rotate the
FUNC knob to select a character, and press the
FUNC knob to enter the character.
: moves the cursor to the left.
: moves the cursor to the right.
: displays the alphabet keypad input screen.
: displays the numeric keypad input screen.
: displays the symbols keypad input screen.
: erases the character to the left of the cursor and
moves the cursor to the left.
• See "Text input screen" on page 75 to input a memory tag.
5. When input is complete, press and hold the FUNC knob to save the characters and
return to "MEMORY INFORMATION" screen.
6. Touch [OK].
Or rotate the FUNC knob to select [OK], then press the FUNC knob.
7. A confirmation pop-up appears. Touch [OK] or select [OK] then press the FUNC
knob to complete the memory tag entry.
The Memory tag is only displayed on the operating band (upper section on the display).
z Clearing Memories
1. Press and hold the
The memory channel list appears. The lowest avail-
able number is selected.
The memory channel list can also be displayed by the
following operations:
Press the FUNC knob  Touch [KEYPAD] 
Select [MEMORY CH LIST]  Press the FUNC knob
The last used memory channel is selected.
2. Rotate the FUNC knob to select the memory channel
from which the data is to be cleared, and press the
FUNC knob.
• Rotate the SUB DIAL knob, or press the [UP] or
[DWN] key on the microphone to fast-forward in
10-channel steps.
3. A popup will appear. Touch [DELETE] or rotate the
FUNC knob to select [DELETE] then press the FUNC
knob.
Confirmation screen "DELETE?" is displayed.
Rotate the FUNC knob to select [OK], then press the
FUNC knob.
Data on memory channel One, and the Home channel may not be cleared.
key.
S-DX DISP
DIGITAL / ANALOG TRANSCEIVER FTM - 500D
MEMORY CH LIST
021 433.300
022 433.620
023 433.300
433.100
024
433.200
MEMORY CH LIST
021 433.300
022 433.620
023 433.300
433.100
024
433.200
YAESU
FTM-500D
JA1YOE
DIGITAL
YAESU
FTM-300D
JA1YOE
DIGITAL
49