Table of Contents
Advertisement
2.
While lightly pushing the brake lever in di-
rection (a), finger tighten the adjusting
bolt to set the brake lever to the desired
position.
1. Locknut
2. Adjusting bolt
3.
Tighten the locknut securely after adjust-
ing the brake lever.
ESU10581
Parking brake lever
When parking the snowmobile or starting the
engine, apply the parking brake by moving the
parking brake lever to the left.
1. Parking brake lever
To release the parking brake, move the park-
ing brake lever to the right.
Control functions
ESU10592
Shift lever
The shift lever is used to put the snowmobile
into forward or reverse. After coming to a
complete stop, pull the shift lever out, slide it
to "FWD" or to "REV" until it stops, and then
release it.
1. Shift lever
1. Pull out.
2. Slide to "FWD" (forward).
3. Release.
17
Advertisement
Table of Contents
