Control functions
1. Locknut
2. Adjusting bolt
3.
Tighten the locknut securely after adjust-
ing the brake lever.
ESU10580
Parking brake lever
When parking the snowmobile or starting the
engine, apply the parking brake by moving the
parking brake lever to the left.
1. Parking brake lever
To release the parking brake, move the park-
ing brake lever to the right.
18
EWS00060
WARNING
Always set the parking brake before at-
G
tempting to start the engine.
Never run the snowmobile with the park-
G
ing brake applied. This may overheat the
brake disc and reduce braking ability.
ESU10590
Shift lever
The shift lever is used to put the snowmobile
into forward or reverse. After coming to a
complete stop, pull the shift lever out, slide it
to "FWD" or to "REV" until it stops, and then
release it.
1. Shift lever
1. Pull out.
2. Slide to "FWD" (forward).
3. Release.