Table of Contents
Advertisement
3.
Remove the headlight unit bolt on each
side of the snowmobile and loosen the
quick fastener screws shown on the top
cover.
1. Headlight unit bolt
1. Quick fastener screw
4.
Slightly lift up the headlight unit, and then
remove the air filter case cover.
Periodic maintenance and adjustment
5.
Lift up the air filter element frame and
check the air filter element. If there is any
snow on the air filter element, remove the
element, brush off the snow, and then in-
stall the air filter element.
6.
Place the air filter element frame in the
original position, and then install the air
filter case cover.
7.
Install the air filter case cover by hooking
the fasteners.
8.
Install the headlight unit, making sure to
insert the projections on the headlight
unit stay into the slots on the bottom of
the headlight unit.
49
Advertisement
Table of Contents
